Pay in 4 interest-free payments of $23.48 Learn more
Ships within 48 hours · Estimated delivery Nov 16 - Nov 21
The length of this part is different between Lane 1 and Lane 2
Viton Ball Gaskets are used with early Legacy WGC-50/100/250 fillers only and press onto the tip of the Filler Valve
Flow control valve
Not compatible with WG8/10 or Gosling seamers
Inner Ring Width: 0
CP Seal Height Rod on/off The length of this partThe CP Seal Height Rod (AKA Tapped Linear Motion Shaft) is used on all Fusion Counter Pressure systems and is used to guide the Fill Head Raise Plate as it moves up and down. All are turned, ground, and polished to tight diameter and straightness tolerances. The surface is hardened, so they stand up to repeated motion while keeping their center soft enough to absorb stress from shifting loads. Chamfered edges remove sharp corners at the end of these
US$ 160.00
US$ 165.00
US$ 200.00
US$ 190.00
US$ 45.00
US$ 190.00
US$ 200.00
US$ 55.00
US$ 48.00
US$ 200.00
US$ 24.95
US$ 48.00
US$ 48.00
US$ 247.50
US$ 257.50
US$ 232.50
US$ 255.00
US$ 175.00
US$ 170.00
